Holla!
Yay jimmy~!
friend on the insane, retarded and alex the hottie for setting up this blogspot for us.
kudos to alex for being such a hottie.
by virtue of the fact that i am the "fountain of useless informations" lets start of our blog with a bang.
How to Break Down a Door
Interior Doors
1. Give the door a well-placed kick or two to the lock area to break it down. Running at the door and slamming against it with your shoulder or body is not usually as effective as kicking with your foot. Your foot exerts more force than your shoulder, and you will be able to direct the force toward the area of the locking mechanism more succinctly with your foot.
Alternate Method (if you have a screwdriver)
* Look on the front of the doorknob for a small hole or keyhole. Most interior doors have what are called privacy sets. These locks are usually installed on bedrooms and bathrooms and can be locked from the inside when the door is shut, but have an emergency access hole in the center of the door handle which allows access to the locking mechanism inside. Insert the screwdriver or probe into the handle and push the locking mechanism, or turn the mechanism to open the lock.
Exterior Doors
If you are trying to break down an exterior door, you will need more force. Exterior doors are of sturdier construction and are designed with security in mind, for obvious reasons. In general, you can expect to see two kinds of latches on outside doors: a passage- or entry-lock set for latching and a dead-bolt lock for security. The passage set is used for keeping the door from swinging open and does not lock. The entry-lock set utilizes a dead latch and can be locked before closing the door.
1. Give the door several well-placed kicks at the point where the lock is mounted. An exterior door usually takes several tries to break down this way, so keep at it.
Alternate Method (if you have a sturdy piece of steel)
* Wrench or pry the lock off the door by inserting the tool between the lock and the door and prying back and forth.
Alternate Method (if you have a screwdriver, hammer, and awl)
* Remove the pins from the hinges (if the door opens toward you) and then force the door open from the hinge side. Place the awl or screwdriver underneath the hinge, with the pointy end touching the end of the bolt or screw. Using the hammer, strike the other end of the awl or screwdriver until the hinge comes out.
Assessing Amount of Force Required.
Interior doors in general are of a lighter construction than exterior doors and usually are thinner—1 3/8" thick-1 5/8" thick—than exterior doors, which generally are 1¾ thick. In general, older homes will me more likely to have solid wood doors, while newer ones will have the cheaper, hollow core models. Knowing what type of door you are dealing with will help you determine how to break it down. You can usually determine the construction and solidity of a door by tapping on it.
* Hollow core. This type is generally used for interior doors, since it provides no insulation or security, and it requires minimal force. These doors can often be opened with a screwdriver.
* Solid wood. This is usually oak or some other hardwood, and it requires an average amount of force and a crowbar or other similar tool.
* Solid core. This has a softwood inner frame with a laminate on each side and a chipped or shaved wood core, and it requires an average amount of force and a screwdriver.
* Metal clad. This is usually softwood with a thin metal covering, and it requires average or above average force and a crowbar.
* Hollow metal. This is of a heavier gauge metal that usually has a reinforcing channel around the edges and the lock mounting area, and is sometimes filled with some type of insulating material. This type requires maximum force and a crowbar.
courtesy of http://www.worstcasescenarios.com and because me and alex have been locked out of our room more than once.
Best Wishes,
Azlan A. Aziz
friend on the insane, retarded and alex the hottie for setting up this blogspot for us.
kudos to alex for being such a hottie.
by virtue of the fact that i am the "fountain of useless informations" lets start of our blog with a bang.
How to Break Down a Door
Interior Doors
1. Give the door a well-placed kick or two to the lock area to break it down. Running at the door and slamming against it with your shoulder or body is not usually as effective as kicking with your foot. Your foot exerts more force than your shoulder, and you will be able to direct the force toward the area of the locking mechanism more succinctly with your foot.
Alternate Method (if you have a screwdriver)
* Look on the front of the doorknob for a small hole or keyhole. Most interior doors have what are called privacy sets. These locks are usually installed on bedrooms and bathrooms and can be locked from the inside when the door is shut, but have an emergency access hole in the center of the door handle which allows access to the locking mechanism inside. Insert the screwdriver or probe into the handle and push the locking mechanism, or turn the mechanism to open the lock.
Exterior Doors
If you are trying to break down an exterior door, you will need more force. Exterior doors are of sturdier construction and are designed with security in mind, for obvious reasons. In general, you can expect to see two kinds of latches on outside doors: a passage- or entry-lock set for latching and a dead-bolt lock for security. The passage set is used for keeping the door from swinging open and does not lock. The entry-lock set utilizes a dead latch and can be locked before closing the door.
1. Give the door several well-placed kicks at the point where the lock is mounted. An exterior door usually takes several tries to break down this way, so keep at it.
Alternate Method (if you have a sturdy piece of steel)
* Wrench or pry the lock off the door by inserting the tool between the lock and the door and prying back and forth.
Alternate Method (if you have a screwdriver, hammer, and awl)
* Remove the pins from the hinges (if the door opens toward you) and then force the door open from the hinge side. Place the awl or screwdriver underneath the hinge, with the pointy end touching the end of the bolt or screw. Using the hammer, strike the other end of the awl or screwdriver until the hinge comes out.
Assessing Amount of Force Required.
Interior doors in general are of a lighter construction than exterior doors and usually are thinner—1 3/8" thick-1 5/8" thick—than exterior doors, which generally are 1¾ thick. In general, older homes will me more likely to have solid wood doors, while newer ones will have the cheaper, hollow core models. Knowing what type of door you are dealing with will help you determine how to break it down. You can usually determine the construction and solidity of a door by tapping on it.
* Hollow core. This type is generally used for interior doors, since it provides no insulation or security, and it requires minimal force. These doors can often be opened with a screwdriver.
* Solid wood. This is usually oak or some other hardwood, and it requires an average amount of force and a crowbar or other similar tool.
* Solid core. This has a softwood inner frame with a laminate on each side and a chipped or shaved wood core, and it requires an average amount of force and a screwdriver.
* Metal clad. This is usually softwood with a thin metal covering, and it requires average or above average force and a crowbar.
* Hollow metal. This is of a heavier gauge metal that usually has a reinforcing channel around the edges and the lock mounting area, and is sometimes filled with some type of insulating material. This type requires maximum force and a crowbar.
courtesy of http://www.worstcasescenarios.com and because me and alex have been locked out of our room more than once.
Best Wishes,
Azlan A. Aziz
posted by D-305 at
1:12 PM
|
0 comments
